Model DMX-68AN Standard Duty with 244A Mast Clamps

Model DMX-68AN Standard Duty with 244A Mast Clamps

Series: DMX Self-Supporting


  • Mast not included
  • For safety reasons we will no longer support adding our current DMX tower sections to obsolete sections. Please refer to our Tower Section Identification document. If the engraving on the inside leg begins with DMX-1 (ex. #8 section = DMX-108) it is an obsolete model. Current sections start with DMX-0 (ex. #8 section = DMX-008).

The new and improved DMX–68AN is our latest option for those looking for an even more robust 68 foot tower. We have replaced the standard TMCA mast clamps with our heavy duty 244A clamps to accommodate up to a 2.5” mast. The DM Mast is not included, but the package remains the same in all other respects: CBS-08 concrete base stubs, top plate, rotor plate, and all necessary hardware.


  • Attractive tapered design.
  • “X” brace with beaded channel leg
  • Enhancements made to both leg profile and taper allow for easier installation and improved tower structure
  • High strength galvanized steel construction
  • Eight foot sections
  • Sections 5 to 8 are 12 gauge, 1 to 4 are 16 gauge galvanized steel
  • Compact shipping package
  • Free standing installation
  • Ideal for amateur radio and industrial/commercial communications applications
  • Climb shields recommended
  • Designed to withhold impact load of a climber in case of a fall in accordance with CSA-S37-13. See installation instructions for more information.*

LOAD LIMITS:  DMX Standard Duty Towers are designed to support up to 3 square feet (0.28 m2) projected wind area.**

NOTE:  Never install a tower or tower section found to have missing or damaged components. Only Wade replacement components or hardware may be used on DMX products. Failure to exercise this caution can result in injury or death. Consult distributors for replacement sections or parts if required.

* Towers have not been tested to be in compliance with other sections of CSA-S37-13.

** Tower load limits are based on survival, and cannot be stamped by a licensed engineer.

  • Tower Height: 68' (20.7m)
  • Wind Load: 3 sq.ft.

Skidded Dimensions: 101" L x 35" W x 29" H / Cubic Feet: 29.6 / Weight: 460 lbs

Unskidded Dimensions: 96" L x 29" W x 29" H / Cubic Feet: 23.7 / Weight: 393 lbs

Request information for this product:


  • DMX-68N Hardware Kit

    • CBS-08 DMX Section 8 Concrete Base Stubs

      • CS-8 DMX Section 8 Climb Shields

        • GS-123 DMX Sections 1-3 Guy Station

          • GS-456 DMX Sections 4-6 Guy Station.

            • Masting

              • DMX-68AN Standard Duty with 244A Mast Clamps

                • Tower Height: 68'
                • Max Wind Load: 3sq.ft.
              • 244A Cast Aluminum Mast Clamp

                • Mast OD: Up to 2½"
              • BBMB Ball Bearing Mast Bearing

                • Mast OD: Up to 2"
              • DMX Top Section Rotor/Top Plates